Browse Our Catalog

Pullers - Super Savings! Save up to 38%

Super Savings! Up to 38% off on Pullers at Daily News Detroit. Top brands include OrionMotorTech, OEMTOOLS, ABN, United Pacific, WFPOWER, LTI, Kaupa, HOTPDR, OTC, Pit Posse, Pit Bull, Chromex Tools, MBS Mfg, & Delray Auto Parts. Hurry! Limited time offers. Offers valid only while supplies last.

OrionMotorTech 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing Remover & Rear Wheel Axle Shaft Puller Tool Kit
By OrionMotorTech
In Stock

mpn: OMT-BJS000200,

4.4 out of 5 stars with 16 reviews
Specification: Item Weight: 13.85 pounds Product Dimensions:8.2 x 23.8 x 4 inches Package List: 1 x Hammer 1 x Cross Block 1 x 3-way Puller Head 1 x Cone 1 x Vise Grip Adapter 1 x Seal Hook 1 x Retainer🔰 Slide Hammer Puller Set ---- Ideal for pulling on press-fit and flange-type parts, such as: rear axle shafts, front-wheel drive hubs, bearings, bushings, gears, pulleys, etc.. 🔰 Internal and External Jaws ---- Include 2-jaw and 3-jaw puller for internal and external pulling

OEMTOOLS 24548 Intermediate U-Joint Puller
In Stock
You Save: 8%

mpn: 24548, ean: 0076812245489,

4.1 out of 5 stars with 7 reviews
Stop wasting time and energy hammering away at seized u-joints-the OEMTOOLS 24548 Intermediate U-Joint Puller safely and easily removes seized u-joints on intermediate trucks, buses and light industrial/farm equipment. This innovative tool can be used with a 1/2'' drive impact wrench (or smaller) to quickly disassemble drive lines; all without damaging the driveshaft, yokes, joints or bearing cups.Easily Removes Seized U-Joint Cups on Intermediate Trucks, Buses and Light Industrial/Farm

ABN Bearing Separator Set, 5-Ton Capacity - Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit
In Stock

mpn: 4218, ean: 0688295874218,

4.0 out of 5 stars with 27 reviews
When you need to separate bearings, use the ABN Bearing Separator Set. It can but used for pulling jobs such as removing bearings from a shaft, splitting bearings, and separating flywheels. It has up to 5 Tons (4.5 MT) capacity and can be used separately or with other pullers or tools. Each piece in this set is drop forged and heat treated with a black oxide finish. The threads on the separators are smooth and come well-oiled. It all comes in a 15'' x 9.7'' x 2'' (38cm x 24.6cm x 5cm) blow-mold

ABN Slide Hammer Puller Set Wheel Bearing Removal Tool w/Slide Hammer Attachments – Wheel Hub Puller Dent Repair Kit
In Stock

mpn: 3032, ean: 0811498033032,

4.9 out of 5 stars with 56 reviews
The ABN Auto Body Slide Hammer Hub Puller Tool Kit is perfect for dent repair and for loosening and pulling tight parts from a vehicle. The car dent repair kit contains a 4.8-pound (2.2 kg) pull hammer with multiple attachments including 2 and 3 jaw internal/external pullers, cv axle puller, locking plier adaptor, puller hook, and dent puller. Slidehammer wheel bearing tool is a car dent repair tool that is used to aggressively remove tightly jammed parts or dents. Made of a strong, durable

ABN 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel
In Stock

mpn: 296, ean: 0688295870296,

4.3 out of 5 stars with 22 reviews
Safely remove gears, sprockets, bearings, pulleys, and flywheels with the ABN 6'' Inch 3-Jaw Gear Puller. This tool features reversible jaws for inside and outside pulling and has 8 different positions, which gives you maximum versatility. It can be set for either short reach or long reach positions. You can use any 17mm hand wrench, ratchet, or combination spanner on the hex head screw for gear or bearing removal. Even if you need to pull rusted bearings, this will get the job done. You can

United Pacific 90010 Chrome 31" Fifth Wheel Pin Puller
By United Pacific
In Stock

mpn: 90010, ean: 0710270900107,

4.5 out of 5 stars with 20 reviews
Long 5th wheel pin puller allows you to release the king pin. 31'' length and solid handle makes the job of releasing your 5th wheel easy, and should fit in most tool boxes. Chrome finish gives that extra shine, even in your tool box.31'' 5th Wheel Pin Puller with Hook. Chrome Finish. 1'' Dia. x 5'' Long Handle 3/8'' Dia. Pole.

WFPOWER Upgraded Aluminum Suction Cup Dent Puller Car Handle Lifter 5", Bodywork Panel Remover Tool Handle, Dent Remover Heavy Duty Glass Lifting Kit for Car Truck Mirror Screen, Sucker 2.2" for Free
In Stock

mpn: Wow Factor, ean: 0676422627554,

4.4 out of 5 stars with 12 reviews
HEAVY-DUTY SUCTION CUP Professional Tool Solutions Since 1991 Silver Aluminum Suction Cup Puller Handle Lifter, 240lb Dent Remover Glass Lifting Tool, Durable Aluminum Handles and Housing, Single Stroke Pump Action, Great for Pulling Dents or Lifting Flat Surfaces. Single Head Aluminium Dent Puller Suction Carrier Features: ●5Inch vacuum suction cup is designed to easily remove dents from any vehicle. This dent puller is ideal for body work on machines and vehicles. ●Durable aluminum handle

LTI Lock Technologies LT855A Texas Twister Air Hammer Puller
In Stock

mpn: LTI-LT855A, ean: 0722699667523,

4.7 out of 5 stars with 39 reviews
Includes new Spring 2018 accessories. (See second photo) •Now you can convert your air hammer into a pneumatic slide hammer with the Texas Twister. •Simply snap the Texas Twister curved air bit into the collet of your hammer with one of the bits attached. Reverse the air hammer handle in your hand now using thumb to push the hammer trigger. Feel the 3000 air hammer blows per minute tuning into new pulling power. •One hand operation allows you to hold parts with your other hand. •Safe

ABN Universal Drill Press Support Block Plate Tool Set Kit, 30 Ton – Bearing and Bushing Repair Removal Installation
In Stock

mpn: 2244, ean: 0811498030055,

4.5 out of 5 stars with 8 reviews
Repeat configurations and accurately press bearings for repair with the ABN Universal Drill Press Support Block Plate Tool Set Kit, 30 Ton - Bearing and Bushing Repair Removal Installation. This support makes any shop press safe and simple to use. It creates a vibration-free, 3-point contact surface for ultimate safety, stability, and support without swiveling. The multiple threaded drillings in the heavy-duty swivel base plate allow for complete versatility and adjustable anvil so the support

Kauplus Slide Hammer Gear/Bearing Puller Slide Hammer Puller Set Internal/ External Slide Hammer Pullers Set
By Kaupa
In Stock
You Save: 3%

mpn: AMZPC0009, ean: 0682698741955,

4.7 out of 5 stars with 58 reviews
The Kauplus Slide Hammer Gear puller set easily to remove bearings, gears, bushings, seals, grease retainers, etc. Three jaw assemblies is ideal for both inside and outside pulling jobs on bearing cups or caps, stubborn oil seals and many press fitted parts and engine parts with either 3-jaw configuration.Extremely versatile puller is ideal for pulling gears, bearings, outer races, grease retainers, and oil seals etc. Set contains 1 pc 3lb. Slide Hammer, 1 pc convex screw connection, 2 pcs Int.

HOTPDR Paintless Dent Removal Tools Dent Repair Puller Kit PDR Dent Lifter Puller Grip PRO with Hammer Tab Down Tools 100W Glue Gun for Auto Body Dent Repair (60 Pcs)
In Stock

mpn: H-060,

4.6 out of 5 stars with 36 reviews
Good news! No more paying for the body shop repairs! Paintless Dent Repair Kits are the new products for removing most minor,and even some major dents, without repainting the vehicle and damaging the factory finish.It's only a tad cost when comparing to a body shop repair. The main reason is no labor cost and no high paint material cost associated like a conventional repair. The Process is 100% environmental friendly, after completing the dent removal, the vehicle will still keep the factory

OTC (1046) Mechanical Grip-O-Matic Puller - 17-1/2 Ton, Long 3 Jaw
In Stock
You Save: 38%

mpn: 1046, ean: 0731413006234,

4.7 out of 5 stars with 59 reviews
The OTC 1046 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.17-1/2 ton capacity, long 3 jaw. Maximum reach of 18-3/4 inches. Maximum spread of 16 inches. Jaw thickness is 13/16 inch. Jaw width is 1-9/32 inch.

OTC (1180) 10-Ton Capacity Push Puller Set
In Stock
You Save: 2%

mpn: 1180, ean: 0731413023033,

4.1 out of 5 stars with 16 reviews
The OTC 1180 contains three popular OTC bar-type pullers in one versatile set packed in a handy plastic storage case. Tools included permit damage-free pulling of gears bearings harmonic balancers and other parts having tapped holes. Ideal for servicing heavy-duty trucks off-road construction equipment and machinery. Set consists of 10-ton push-puller with a 8-3/8'' reach and a 2-1/8'' to 7-1/4'' spread. 6-3/4'' puller legs. Gear and pulley puller have a spread range when used with 1/2'' cap scr

Pit Posse PP1694 Motorcycle Blind Bearing Bushing Puller
By Pit Posse
In Stock

mpn: PP1694,

4.7 out of 5 stars with 7 reviews
Set includes 30, 25, 20, 17, 15, 12, 10, and 8mm collets 2 pound slide hammer Crossbar type shaft allows easy collet removal Necessary tool for most transmission rebuilds Can be used for wheel bearing removal Lifetime warranty backed by Pit Posse's 15 years of producing quality toolsNecessary tool for most transmission rebuilds. Set includes 30, 25, 20, 17, 15, 12, 10, and 8mm collets. Lifetime warranty packed by Pit Posse's 15 years of producing quality tools.

Pit Bull CHIC3960 2000LB Pallet Puller
By Pit Bull
In Stock

mpn: CHIC3960, ean: 0794685130656,

4.1 out of 5 stars with 17 reviews
Capacity: 2000 lbs. Maximum jaw width: 5''.Fits 1-1/2'' space pallet. Lightweight, one-man tool that can easily be attached to your forklift for an extended reach. Variable jaw width pulls pallets securely then releases when needed.Capacity: 2000 pounds. Maximum jaw width: 5''. Fits 1-1/2'' space pallet.

5 Ton 3 Jaw Hydraulic Gear Puller, Wheel Bearing Hub Removal Tool with Work Gloves and Storage Box
By Chromex Tools
In Stock

mpn: ADX1-1006, ean: 0812376011630,

4.2 out of 5 stars with 42 reviews
The Chromex Tools Hydraulic Gear Puller is designed to pull items such as bearings, bushings, wheels, gears, pulleys, and chucks from shafts. The jaws can grip the object from the inside or outside, whichever offers a better grip. The piston will push on the central shaft while the jaws pull away. This will remove the item from the shaft by pulling it straight out evenly, without hammering or binding from pulling at an angle.Specifications:Handle Size: 15''Max Pulling Force: 5 Tons (10,000

United Pacific 90013 Chrome 36" Fifth Wheel PIN Puller W/Hook
By United Pacific
In Stock
You Save: 1%

mpn: 90013, ean: 0710270900138,

4.7 out of 5 stars with 50 reviews
Long, extended 5th wheel pin puller allows you to release the king pin. 36'' length and solid handle makes unhooking your 5th wheel a snap. From United Pacific, your trusted big rig accessories resource!.36'' 5th Wheel Pin Puller with Hook. Chrome Finish. 1'' Dia. x 5'' Long Handle and 3/8'' Dia. Pole.

MBS Mfg Boat Alpha, Bravo, Omc Gimbal Bearing Puller/Remover
By MBS Mfg
In Stock

mpn: HPGBP-E18,

4.4 out of 5 stars with 7 reviews
this gimbal bearing puller tool will remove bearings on mercruisers, omc and volvo cobra bell housings. Works on mercruiser alpha, alpha 1, mr, bravo, omc cobra, and volvo. tool is made from high quality tool steel proudly manufactured and assembled in the united states. The steel is purchased locally from an american supplier in chicago. The black oxide coating is done bypany in chicago. The cnc machining is done in our own shop in chicago. Machined. No casting! 100% made in the united

OTC 6540 Rear Axle Bearing Puller Set - 8 Piece
In Stock
You Save: 20%

mpn: 6540, ean: 0719918336766,

4.8 out of 5 stars with 60 reviews
Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks in a blow mold case. Rear axle bearing puller fits minimum bearing tube I.D. of 1'' and max axle tube I.D. of 1-7/8''. Rear axle bearing puller fits minimum bearing tube I.D. of 1-5/16'' and max axle tube I.D. of 2-3/8''. Rear axle bearing puller fits minimum tube I.D. of 1-3/8'' and max axle tube I.D. of 2-7/8''. Slide

Delray Auto Parts 15 Piece Slide Hammer Puller Set - Ideal for Removing Axles, Seals, Bearings, and More
By Delray Auto Parts
In Stock

mpn: DAP006,

4.9 out of 5 stars with 7 reviews
Complete 15 piece slide hammer set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal / External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and Retainer.Includes the following pieces Slide Hammer Puller Head Pulling Adapter Cross Block Internal / External Puller Jaw Hex Jaw Nuts & Screws (3) Vise Grip Adapter (single-lead thread) Seal

Viewing Page 1 of 4

View more products in Tools & Equipment.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2020 - All Rights Reserved.