Pullers - Page 3 - Super Savings! Save up to 32%
Super Savings! Up to 32% off on Pullers at Daily News Detroit, Page 3. Top brands include Supercrazy, Goplus, OTC, A ABIGAIL, 8MILELAKE, Jecr, NICECNC, DASBET, Sydien, Pit Posse, OrionMotorTech, Lisle, Shankly, Seven Sparta, & BestEquip. Hurry! Limited time offers. Offers valid only while supplies last.
Goplus 16PC Slide Hammer Dent Puller 2/3 Jaw External Internal Oil Seal Bearing Remover
You Save: 29%
mpn: 11AA, ean: 6952938345156,
4.5 out of 5 stars with 11 reviews
16PC Slide Hammer Dent Puller 2/3 Jaw External Internal Oil Seal Bearing Remover.Converts Into A 2 Or 3 Jaw Internal Or External Puller For Reaching tighten area. Combination Puller With 5LBS Malleable Steel Slide Hammer. Drop Forged Steel Pullers And Attachments. Rear Axle Puller & Dent Puller. Grip Locking Wrench Adaptor.
OTC (939) 30 Ton Push Puller
mpn: 939, ean: 0731413006104,
4.4 out of 5 stars with 16 reviews
The OTC 939 removes and installs press-fit parts. It can be used with numbers 1126 and 1127 bearing pulling attachments or number 680 pulley pulling attachment (two 8012 adapters are required to connect 680 to puller). It can be used with number 1165 internal pulling attachment. Its maximum reach is 10-1/2'' with a spread of 7'' to 16-1/4''.Maximum reach is 10-1/2 inches. Spread of 7 inches to 16-1/4 inches. Can be used with numbers 1126 and 1127 bearing pulling attachment. Can be used with numb
OTC 5028 1-1/2 lbs. Slide Hammer Puller
You Save: 20%
mpn: 5028, ean: 0731413009648,
4.3 out of 5 stars with 41 reviews
OTC 1-1/2 pounds It has a slide hammer puller The number 5028 slide hammer is just 8-1/ 2 inch long to fit into tight spots but its 1-1/2 pound hammer gives you a little extra muscle for stubborn jobs. It's perfect for pulling injector nozzles. The shank is threaded 1/ 2 inch -20 and has a 5/8 inch -18 threaded adapter included. It works with many OTC pulling attachments.The 5028 slide hammer is just 8-1/ 2 inch long to fit into tight spots. The 1-1/2 pound hammer gives you a little extra muscle
OTC (1026) Mechanical Grip-O-Matic Puller - 5 Ton, 2/3 Jaw (Reversible Jaws)
You Save: 20%
mpn: 1026, ean: 0731413010262,
4.8 out of 5 stars with 9 reviews
The OTC 1026 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.5 ton capacity, 2/3 jaw, reversible jaws. Maximum reach of 3-1/4 inches. Maximum spread of 7 inches. Upper jaw thickness is 5/16 inch, lower jaw thickness is 1/4 inch. Upper jaw width is 3/8 inch, lower jaw width is 3/4 inch.
OTC Puller Set, Bearing
You Save: 3%
mpn: 4534, ean: 0731413040276,
4.1 out of 5 stars with 28 reviews
Bearing and Pulley Puller Set, Multipurpose, For Use With Bearings, Alternators, Timing Gear, Max Spread 5 In, Min Spread 3 In, Reach 1 To 2 1/4 Inches, Screw Size 3/4-16 x 6 11/16 Inches and 3/4-16 x 5 Inches, Includes 2 Forcing Screws, 2 Cross-Bar Yokes, 2 Clamp Bolts, 3 Pair Puller Jaws, 1 Pair Jaw Pins, 3 Pairs of Cap Bolts, Blow Molded CaseMpn: 4534. Country of manufacture: Taiwan. Manufacturer: Otc.
OTC (1022) Mechanical Grip-O-Matic Puller - 2 Ton, 2 Jaw (Reversible Jaws)
You Save: 32%
mpn: 1022, ean: 0069060272161,
4.5 out of 5 stars with 27 reviews
The OTC 1022 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.2 ton capacity, 2 jaw, reversible jaws. Maximum reach of 3-1/4 inches. Maximum spread of 4 inches. Upper jaw thickness is 3/16 inch, lower jaw thickness is 1/8 inch. Upper jaw width is 1/4 inch, lower jaw width is 1/2 inch.
Lisle 45000 Steering Wheel Puller
You Save: 28%
mpn: 45000, ean: 0083045450009,
4.3 out of 5 stars with 34 reviews
Steering Wheel Puller is a universal puller made for most makes and models, brought to you by Lisle.Screw pad protects end of steering shaft. Heavy duty for long wear. Comes in a clam shell package.
Shankly Steering Wheel Puller Set (8 Piece), Professional Grade, 1.5" to 3.35" Inch Spread
You Save: 18%
mpn: D1078, ean: 0780437647138,
4.7 out of 5 stars with 52 reviews
Shankly's steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models. Shankly's steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5'' / 3.35'' inches to ensure the tool set can be used for many types of steering wheel puller jobs. Shankly's steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed for light and heavy dut
Lisle 37370 Glow Plug Harness Puller Ford
You Save: 17%
mpn: 37370, ean: 0083045373704,
4.4 out of 5 stars with 54 reviews
Removes and installs the wire harness on glow plug connectors on Ford 6.0L and other diesel engines. Made of stainless steel for rigidity and durability.Helps prevent damage to the harness and connector rail. It features a thumb tab and a textured highly visible grip that provides a better grip on the tool when removing the harness. The harness is fragile and can break, but with a better grip the technician will have more control when removing the harness.