Browse Our Catalog

Tool Sets - Page 7 - Super Savings! Save up to 37%


Super Savings! Up to 37% off on Tool Sets at Daily News Detroit, Page 7. Top brands include Dawson, CTA Tools, Lisle, OTC, Jecr, Shankly, LEDAUT, MOSTPLUS, MIKKUPPA, HFS, SUNTUE, Mechanic's Time Savers, Smartxchoices, boeray, & Tool Aid. Hurry! Limited time offers. Offers valid only while supplies last.



CSM12E 3/4" (19mm) Strut Channel Socket 1/2" Drive for 2-7/16" or 3-1/4" Deep Channel
By Dawson
In Stock
$69.99
$64.46
You Save: 8%

mpn: CSM12E, ean: 0642415999885,

4.2 out of 5 stars with 21 reviews
The Dawson 3/4'' (19mm) Strut Channel Socket is designed for use with all 3-1/4'', 2-7/16'', and 1-5/8'' channel, allowing for easy tightening and loosening of ½'' bolts with ¾'' heads that can't be accessed with a traditional ¾'' socket head. This tool eliminates the need for fabricating a custom socket or tightening bolts and strut fittings with a hand wrench.4-1/4'' Overall Length. Compatible with all 1-5/8'', 2-7/16'', and 3-1/4'' channels and Strut. For use with All 1-5/8'', 2-7/16'' & 3


CTA Tools 1076 Volvo Heater Blower Motor Removal and Install Tool
By CTA Tools
In Stock
$91.34
$75.21
You Save: 18%

mpn: 1076, ean: 0053001010769,

4.4 out of 5 stars with 43 reviews
Removes and installs the climate control Blower motor. Services Volvo: S60L (2007-2016), S80 (2007-2016), S80L (2008-2016), V60 (2008-2016), V60 cross country (2008-2016), V70 (2008-2016), XC60 (2008-2016), XC70 (2008-2016), S60 (2011-2016). land-rover: LR2, range Rover Evoque California prop 65 - warning, this product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.Removes and installs the climate control blower motor. Services Volvo


Lisle 30500 CV Boot Clamp Plier
By Lisle
In Stock
$24.79
$15.69
You Save: 37%

mpn: 30500, ean: 0031113087060,

4.9 out of 5 stars with 19 reviews
A sturdy, low-cost tool. Works on earless-type clamps including those found on GM inboard CV joints.For earless-type clamps. Comes in skin-pack.


OTC 1909 3-1/4" 8-Point Octagon Locknut Wrench
By OTC
In Stock
$27.95
$20.63
You Save: 26%

mpn: 1909, ean: 0080850301731,

4.3 out of 5 stars with 36 reviews
Bearing Locknut Socket - 3-1/4 In - 8 Pt Truck wheel bearing locknut socket has 3/4'' square drive opening. Permits the use of an extension & torque wrench to tighten the locknut as required. Locknut removal & installation is simple, even when wide rim wheels are involved. A long extension may be attached to the socket to provide the necessary clearance. Socket is made of high-strength steel. Opening resists ''rounding out.''3-1/4 inch 8-point octagon locknut wrench. High strength steel resists


Jecr Bearing and Seal Puller Tool - Oil Grease Puller Extractor Tool - Auto Seal Oil Grease Removal - Puller Seal Set with 2 Size Tips - Heavy Duty Driver Tool to Remove Oil & Grease, by
By Jecr
In Stock
$13.45

mpn: JB0062,

4.8 out of 5 stars with 13 reviews
Designed to remove oil and grease seals when servicing cars SUVs and trucks without damaging the housing or bearing. Hook tips in two sizes and professional handle design allows removal of hard-to-get-at seals by getting under them. The tool is 12'' long and the hook tip is double-secured for premium durability. Coated with black oxide finish to resist corrosion. Easy to use without scoring surfaces. Two size tips, reaches most seal applications. How to Use: Jack-up vehicle on jack stands


Shankly 4 Piece 3/8" Glow Plug Socket Set, Diesel Glow Plug Socket
By Shankly
In Stock
$24.95
$20.95
You Save: 16%

mpn: 01801, ean: 0780437647053,

4.2 out of 5 stars with 52 reviews
Shankly's glow plug puller features the following sockets sizes: 8mm (0.31'' inches), 10mm (0.39'' inches), 12mm (0.47'' inches) sockets, including a 75mm (2.95'' inches) extension bar. Shankly's glow plug wrench set helps users quickly and effectively remove glow plugs from a variety of different makes and models. This glow plug socket features a handy carrying case which makes organization easy, storage simple and transportation a breeze. Shankly's glow plug remover is a better alternative to


LEDAUT Car-Trim-Removal-Tools-Set-26Pcs Auto Upholstery Panel Trim Removal Tool Nylon Kit for Car Dash Audio Radio Removal Installer and Auto Clip Repair Pry Tool Kits with Storage Bag
By LEDAUT
In Stock
$23.99

mpn: LDCZGJ, ean: 0725732603465,

4.4 out of 5 stars with 54 reviews
Installing Or Removing Stereo System: Works great for Automotive, Marine, Furniture or Aircraft Trim removal and installation, including Door Panels, Moldings, Window Trims, Clips, Fasteners, Emblems, Panels, car audio/radio, dashboards, windows, interior accessories,etc. Door Panels, Moldings, Window Trims, Clips, Or Any Plastic Piece In Your Car Without Damaging The Car Like Metal Tools. Package Include: 11pcs interior trim disassemble tools 1pc Trim Clip Removal Pliers 2pcs upholstery fasten


Lisle 30600 Offset Boot Clamp Plier
By Lisle
In Stock
$21.15
$20.40
You Save: 4%

mpn: 30600, ean: 0083045306009,

4.7 out of 5 stars with 12 reviews
The offset boot clamp plier is a special boot clamp crimping plier that is designed to work in confined spaces. The pliers work from the side (head is turned 90 degrees) unlike traditional tools that work from the end. It crimps ear-type clamps in hard-to-reach areas.Crimps ear-type clamps in hard-to-reach areas. Designed to work in confined spaces.


Lisle 71200 Stud Remover
By Lisle
In Stock
$21.79
$21.75

mpn: 71200, ean: 0083045712008,

4.0 out of 5 stars with 18 reviews
Allows for easy removal of studs. Tool has two holes, 1/2 inch (14 mm) and 3/4 inch (19 mm) for optimum fit, minimizing damage to threads. Range 3/8 inch (10 mm) - 3/4 inch (19 mm). Design allows tool to grip flush with mounting surface of the stud so it can grab studs that are broken off very close to the mounting surface. Use with 1/2 inch square drive.Allows for easy removal of studs. Tool has two holes, 1/2 inch (14 mm) and 3/4 inch (19 mm) for optimum fit, minimizing damage to threads. Use


MOSTPLUS Engine Overhead Solid Valve Spring Compressor Automotive Tool C Clamp Service Set-10 Pieces
By MOSTPLUS
In Stock
$16.77

mpn: 2230129,

4.6 out of 5 stars with 11 reviews
FeaturesProfessional valve spring compressor tool allows you to remove and compress valve springs on most cylinder heads more convenient.Comes with 5 adaptors for various spring diameters, as well as to fit valve spring correctly for safe and easy compression. Ideal for use on most car, small van and motorcycle engines.Made of solid steel material, heavy duty construction, sturdy and durable.Complete 10 pcs parts are well packed and assorted in a plastic box for convenient storage and carry.Fitm


Lisle 39650 39mm Axle Nut Socket for Toyota Tundra/Sequoia/Land Cruiser
By Lisle
In Stock
$16.92
$14.89
You Save: 12%

mpn: 39650, ean: 0083045396505,

4.7 out of 5 stars with 37 reviews
This 39 millimeter 12 point Axle Nut Socket for Toyota removes and installs axle nuts on 4 wheel drive axle hubs on Toyota/Lexus SUV models. It is manufactured from durable, impact-grade, heat-treated alloy steel. Also it is extra deep to fit over various axle lengths. This applications includes 2008-2010 Toyota Land Cruiser, 2008-2010 Toyota Sequoia, 2007-2010 Toyota Tundra and 2008 Lexus LX 570.Works everywhere. Use with 1/2 inch drive. 12 point axle nut socket.


MIKKUPPA for VW Audi Skoda Engine Injector Removal Puller Tool Kit - Car Repair Garage Installer Tools Set - Replacement T10133, SF0053
By MIKKUPPA
In Stock
$100.00
$69.79
You Save: 30%

mpn: QRT008,

4.4 out of 5 stars with 25 reviews
MIKKUPPA Fuel injector puller designed for the removal of FSI type injectors fitted to Volkswagen, Audi, Seat, Skoda & other European vehicles engines Covering: 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI ENGINES Fuel Injector Puller Tool Kit Included: » Ball type insertion adaptor » Injector puller large cup type for FSI type injectors.23mm x 76mm » Injector puller small cup type for FSI type injectors.14mm x 40mm » Injector puller two legs (thin) for FSI type injec


HFS (R) 8pc Petrol Engine Cylinder Compression Test Tester Kit Automotive Tool
By HFS
In Stock
$16.99

mpn: 18572,

4.2 out of 5 stars with 24 reviews
Product instrKEY POINT:Test fuel pump output pressure to 10PSIRead engine vacuum to 28'' HGComes with large 3-1/2'' diameter gauge and 24'' long vacuum hoseAdapters suitable for most vehiclesProduct instructions and carrying case includedTest fuel pump output pressure to 10PSI.. Read engine vacuum to 28'' HG.. Check carburetor settings and valve adjustments.. Comes with large 3-1/2'' diameter gauge and 24'' long vacuum hose.. Adapters suitable for most vehicles..


SUNTUE Essential Kit with Long Reach Grabber,Air Pump Bag,Non Marring Wedges,Professional Tools for Car and Truck
By SUNTUE
In Stock
$39.95

ean: 0701806873781,

4.1 out of 5 stars with 16 reviews
Specifications: Item Type: Repair Tool Materials: Stainless Steel + Plastic Package Include: 1 x Long Reach Grabber 1 x Knob Grabber1 x Short Grabber 5 x Pry Tools 2 x Non Marring Wedges 1 x Air Pump WedgeEssential Tools: Repair tools for door and windows Alignment,roadside assistant emergencies. Long Reach Grabber:Made by stainless steel,51 inch Long Reach Grabber,Includes 20 inch Extension rod up to 71 inches in maximum reach.. High Quality Air Wedge:Made by High quality TPU material,Bearab


Mechanic's Time Savers MTSLASTRAY 5 Row Lock-A-Socket Tray
By Mechanic's Time Savers
In Stock
$53.27
$42.28
You Save: 21%

mpn: MTSLASTRAY, ean: 0100069974523,

4.4 out of 5 stars with 31 reviews
Mechanic's Time Savers MTSLASTRAY (10) / LASTRAY (2)76 Lock-A-Socket posts allow you to have 1/4''. 3/8'' and 1/2'' drive Lock-A-Sockets. Heavy duty powder coated steel. Swiveling handles for easy transporting. Carry 5 sets of sockets at one time.


Smartxchoices Fender Roller Extending Wheel Arch Roller Flaring Former Reforming Tool (Blue)
By Smartxchoices
In Stock
$49.00
$38.99
You Save: 20%

mpn: CECOMINOD075815, ean: 0763684004282,

4.9 out of 5 stars with 12 reviews
Smartxchoices Heavy Duty Fender Roller Reforming Extension Fender Rolling Tool. Instroduction: Use for fender collision repair or fender or to increase fender clearance; increase clearance between tire and fender, flares fenders; Protects your vehicle from damage when upgrading a larger tire/wheel, or installing fender flares; Made of Study steel; Fully adjustable to fit in the space between the wheel hub and inner fender lip; Fit most cars and light trucks with 4 or 5 lugs; Simple and easy


Lisle 64100 Actuator Motor Wrench Set
By Lisle
In Stock
$39.50
$31.60
You Save: 20%

mpn: 64100, ean: 0083045641001,

4.6 out of 5 stars with 53 reviews
Toothless, infinite ratchet and hinged handle design make it easier to remove and replace fasteners on small, Electric HVAC motors.These motors control air flow into the vehicle and are commonly found in confined areas under the vehicle dash. The ratchet can be flipped to switch from Clockwise to counterclockwise drive. Includes 8mm socket and 1/4'' square drive adapter for use with 1/4'' sockets and bit holders. Most commonly found fasteners are 5.5mm, 8mm, and T-15 Torx. Can also be used in ot


boeray 15 Inch Heavy-Duty Ratcheting Chain Wrench Oil Filter Tool Pipe Fittings Tools
By boeray
In Stock
$38.99
$37.99
You Save: 3%

mpn: GG0027, ean: 0681013204649,

4.1 out of 5 stars with 52 reviews
Boeray Heavy-Duty Ratcheting Chain Wrench Oil Filter Tool Pipe Fittings Tools Surface spray powder paint,anti-corrosion; Use high quality carbon steel, forged, sturdy and durable; Concave-cut teeth for improved gripping; easily resharpened if needed; The length of the chain can be adjusted,fit most of oil filters and pipe fittings; About us Boeray Machinery, which is a professional seller for all kinds of hardware and tools, such as T slot profile accessories, hose fitting, lawn mower parts,


OTC 6711 Dashboard Service Tool Kit for Mercedes-Benz
By OTC
In Stock
$41.24
$39.50
You Save: 4%

mpn: 6711, ean: 0731413504747,

4.2 out of 5 stars with 59 reviews
OTC Mercedes-Benz Dashboard Service Tool Kit covers virtually all Mercedes-Benz models since 1992. This 8-piece tool kit contains 2 each removal tools for ignition lock on model W126, 2 each removal tools for ignition locks on models W124 and W201, 2 each removal hooks for instrument cluster on models W107 W116 W123 W124 W126 W140 and W201, and 2 each radio removal tools on models W129 W140 W202 and W210.Covers virtually all Mercedes-Benz models since 1992. 2 each removal tools for ignition lock


Tool Aid S&G (89770) Flexible Body File Adjustable Holder
By Tool Aid
In Stock
$39.90
$34.71
You Save: 13%

mpn: 89770, ean: 0638570897708,

4.5 out of 5 stars with 52 reviews
Fits all 14_ flexible body files. Aluminum and steel construction. Turnbuckle design allows body file to be curved concave or convex. Files mount quickly and easily on holder with two mounting screws. For right and left hand use.ADJUSTABLE HOLDER FOR 14'' FLEXIBLE BODY FILES.



Viewing Page 7 of 8

View more products in Tools & Equipment.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - dailynewsdetroit.com. All Rights Reserved.