AccurateDiesel 6.0L Ford Powerstroke Fuel Injector Sleeve / Cup Puller and Installer Set with Cups and Orings
AccurateDiesel 6.0L Ford Powerstroke Fuel Injector Sleeve / Cup Puller and Installer Set with Cups and Orings by AccurateDiesel at Daily News Detroit. MPN: MPSPK1-kit. Hurry! Limited time offer. Offer valid only while supplies last. Our 6.0L / 6.4L Injector Sleeve Remover / Installer Tools offer several unique design features compared to competitive products. Unlike other products, our tap is separate from the puller portion of the tool. The advantage is that when the tap becomes damaged or worn, it is possible to replace inexpensively at the local hardware store as opposed to replacing an expensive and not-readily-available special tool. Because the 6.0L injector cups are made of hard steel and tend to be difficult to tap
Product Description & Reviews
Our 6.0L / 6.4L Injector Sleeve Remover / Installer Tools offer several unique design features compared to competitive products. Unlike other products, our tap is separate from the puller portion of the tool. The advantage is that when the tap becomes damaged or worn, it is possible to replace inexpensively at the local hardware store as opposed to replacing an expensive and not-readily-available special tool. Because the 6.0L injector cups are made of hard steel and tend to be difficult to tap we have found this to be a significant consideration. Our sleeve installation tool features an o-ring to retain the injector sleeve to the installer. This prevents the frustration of having the injector sleeve continually dropping off the end of the tool. The ability of our 6.0L / 6.4L injector sleeve tool set to service both engines is unique in the marketplace - other designs require a separate tool for each engine. By purchasing our tool you are getting double the value for your money, since only one tool is required for two applications. (Cups / orings in this kit are 6.0L only.) The OEM Ford tool kit requires that the cylinder heads be removed from the vehicle in order to replace the sleeves. Our kit makes this repair relatively simple and allows the task to be performed on the vehicle in a fraction of the time. IMPORTANT NOTE: It is commonly misconceived that injector cup failure can cause the common 6.0L concern of diesel fuel being found in the engine's coolant. Diesel fuel in the coolant on a 6.0L is almost universally caused by a crack in the injector bore of the cylinder head ABOVE the injector sleeve. AccurateDiesel carries an extended injector sleeve kit that repairs this condition without requiring the head to be removed from the vehicle. Our 6.0L / 6.4L injector sleeve tool set offers a manufacturer's lifetime warranty. To our knowledge, no other 6.0L sleeve tool set offers a warranty. Please note that the tap itself is not covered.
Features & Highlights
- For all 6.0L Ford Powerstroke diesel 2003 - 2010, Tool Features Lifetime Warranty
- Kit includes (8) OEM Ford Injector cups plus a full set of Injector Orings
- Tool allows replacement of the injector sleeves / cups without removing the heads from the vehicle
- New design utilizes a separate tap - if the tap becomes damaged it can be replaced locally at low cost versus replacing the entire tool
- Intstallation tool utilizes an o-ring to retain the injector cup and keep it from dropping off during installation
Fuel Pressure Testers
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by AccurateDiesel, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Inspection grade fuel cap tester designed for use in State Inspection and Maintenance programs*Use Hickok/Waekon Fuel Cap Testers with any Stant Fuel Cap AdaptersThe FPT25-4 black adapter that is included in the kit works with any Stant Fuel Cap Adapter including the Pass and Fail standard caps.The FPT2600EX-1 includes these features: Battery operated handheld tester electronically check's a fuel cap's ability to hold pressure. Complete set of cap adapters that meet EPA standards for
By Gain Express
mpn: E04-039, ean: 0600316560108,
The tester can help diagnose injector problems, you can use it to test each injector individually to help identify stuck, leaking or burnt-out conditions. It uses 12V vehicle battery for power. It has 4 pulse mode,(1)Short,(2)Medium,(3)Long ,(4)Continuous mode that helps identify good or bad injector. Features Digital LCD display Four (4) Pulse Mode *Mode 1 : outputs 1 pulse, whose pulse width is about 250ms. *Mode 2 : output 50 pulses, every pulse's pulse width is about 7ms. *Mode 3 : output
mpn: Generic, ean: 0680613108623,
GooMeng Technology Co., Ltd. is mainly engaged in the production and processing of auto parts,auto maintenance tools,car detectors and other products.There are more than 100 kinds of existing products,and the products are sold at home and abroad.GooMeng Technology develops step by step with a complete and scientific quality management system and integrity-based business objectives. Excellent product quality is recognized by the industry. Features: 100% Brand New. Color:As shown ★Kit allows
mpn: 518487, ean: 0731413189746,
Adapter, Fuel Line (Tbi)Purchase Price is 1 Each.