AUTOOL HTS558 walnut powder engine Intake pipe valve clean machine is a advanced equipment for clean engine intake carbon deposition. Keeping engine in healthy status, make sure engine provide high quality power constantly.
What is walnut powder(sand)?
Crash walnut shell into powder, after a vigorous selection process then we get walnut sand. It show high performance in the three area: hardness, anti-pressure, wear-resisting. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive. It was hardly dissolved in acid, alkali and water. Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition, it will clean intake pipe and back side of intake valve thoroughly but no damage.
1 Air pump pressure should more than 0.7Mpa (7bar/102PSI)
2 Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)
3 Cleaning time between 1-3 minutes
How to use?
1. Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close cover
2. Join spary gun muzzle and recycle hose together (there is a hole on recycle hose)
3. Remove intake manifold of engine, plug spray gun into intake, turn crankshaft to close intake valve. Connect high pressure air pump((not include)) to HTS558
4. Connect AC power, start clean. The process should last 1-3minutes(depending on carbon deposition circumstances)
5. Close AUTOOL HTS558, check up cleaning result. Normally, walnut powder can be reuse 5-10 times(depending on carbon deposition circumstances)
1x AUTOOL HTS558 unit
2x Spray gun
1x Recycle hose
1x Recycle hose and spray gun connector
We ship it from New Jersey for quick delivery!