B&K Precision 875B Low-Ohm LCR Meter
Huge Savings Item! Free Shipping Included! Save 13% on the B&K Precision 875B Low-Ohm LCR Meter by B&K Precision at Daily News Detroit. MPN: 875B. Hurry! Limited time offer. Offer valid only while supplies last. The B&K Precision 875B Low-Ohm LCR Meter is a digital meter that measures inductance from 200 microhenries to 200 henries, capacitance from 200 picofarads to 20 millifarads, and resistance from 2 ohms to 20 megaohms as well as dissipation factor between 0 and approximately 1.999. The meter allows for resistance measurements down to 1 milliohm of resolution allowing for precise measurement of very low resistances. It has a 3-1/2 digit LCD that indicates the last 5% of battery life and uses a 9V
Product Description & Reviews
The B&K Precision 875B Low-Ohm LCR Meter is a digital meter that measures inductance from 200 microhenries to 200 henries, capacitance from 200 picofarads to 20 millifarads, and resistance from 2 ohms to 20 megaohms as well as dissipation factor between 0 and approximately 1.999. The meter allows for resistance measurements down to 1 milliohm of resolution allowing for precise measurement of very low resistances. It has a 3-1/2 digit LCD that indicates the last 5% of battery life and uses a 9V battery (not included). It has a drop-proof housing for protection and a tilt stand for hands-free viewing. The meter measures 6.97 x 3.46 x 1.57 inches/177 x 88 x 40 mm (H x W x D) and weighs 14 oz./400 g. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.B&K Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.What's in the Box?875B LCR meterPair of test clipsInstructions
Features & Highlights
- Digital meter measures inductance, capacitance, and resistance
- Measures dissipation factor
- Zero adjustment removes lead resistance
- Measures resistance down to 1 milliohm resolution for precise measurement of low resistances
- Display indicates when 5% battery life remains
B&K Precision Corporation
Multimeters & Analyzers
B&K Precision Corporation
4.7 x 2.2 x 7.6 inches
4.7 x 2.3 x 7.5 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by B&K Precision, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 260-8 | 12388, ean: 0094701188471,
Accuracy for the lab, rugged construction for the field Excellent for adjustments such as nulling and peaking Large color code scale AC frequency response to 100 KHz Zero RFI Standard and high energy overload fusing Varistor protected meter movement UL 1244 listed Mirrored scale Broad range of accessories and probes Wide range capabilities Overload protection relay circuits What's included: test leads, alligator clips, manual, batteries, fuses, and a spare 1A fuse.Description: Black Analog
By Electronic Specialties
mpn: 685, ean: 0069060129489,
DC/AC Current Probe is a great tool for all purpose electrical testing. Applications include: fuel injection systems, fuel pumps, charging systems, electric motors, and most parasitic drains. Capable of measuring as low as 10 milliamps.35 test ranges; continuity beep. 10 test functions - overload protection. Auto power off - clamp opening 7/8 inches. Auto-ranging; 9 volt battery included. Data hold - carrying case included.
mpn: VPS410-II-V, ean: 0095969655644,
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications..
By Electronic Specialties
sku: DOBA-ESI695, mpn: 695P, ean: 0999992394085,
This is a great tool for accurate measurement of low current. Use with your graphing meter or lab scope to view current waveforms on fuel injectors, fuel pumps, primary ignition coils and more. Also works very well with digital multimeters (DMM's). Jaw opening of 1/2 inch is large enough to clamp over negative battery cables for battery drain testing.Compatible with most digital multimeters, lab scopes and graphing meters. Test ranges of 0 to 8 ampere and 0 to 80 ampere - AC/DC. Resolution of