Cim-Tek 70059-12 300HS-10 Spin-On Filter for Water Detection 12-Pack


Cim-Tek 70059-12 300HS-10 Spin-On Filter for Water Detection 12-Pack by Cim-Tek at Daily News Detroit. MPN: 70059-12. Hurry! Limited time offer. Offer valid only while supplies last. The Cim-Tek 70059 dispenser filter removes particulates like dirt, dust, and rust. For use with gasoline, diesel, biodiesel up to B20, and ULSD fuels. The maximum flow is 25 gpm/94.6 lpm. The maximum working pressure is 50 psi/3.4 bar. The maximum differential pressure is 25 psi/1.7 bar. The HYDROSORB 300 Series Spin-on Filters have a standard 3/4 in. opening required for most service station pumps and dispensers. The 300HS-1 0 Type 2, a nominal 1 0 micron, is recommended for gasoline and


Images:
Cim-Tek 70059-12 300HS-10 Spin-On Filter for Water Detection 12-Pack by Cim-Tek (Image #1)
Cim-Tek 70059-12 300HS-10 Spin-On Filter for Water Detection 12-Pack by Cim-Tek (Image #2)
Cim-Tek 70059-12 300HS-10 Spin-On Filter for Water Detection 12-Pack by Cim-Tek (Image #3)
Brand: Cim-Tek
4.5 out of 5 stars with 21 reviews
Condition: New
Availability: In Stock
$94.10


Quantity:  

 



Product Description & Reviews

The Cim-Tek 70059 dispenser filter removes particulates like dirt, dust, and rust. For use with gasoline, diesel, biodiesel up to B20, and ULSD fuels. The maximum flow is 25 gpm/94.6 lpm. The maximum working pressure is 50 psi/3.4 bar. The maximum differential pressure is 25 psi/1.7 bar. The HYDROSORB 300 Series Spin-on Filters have a standard 3/4 in. opening required for most service station pumps and dispensers. The 300HS-1 0 Type 2, a nominal 1 0 micron, is recommended for gasoline and diesel fuels. The 300HS-30 Type 2, a nominal 30 micron, may be preferred for heavier distillates such as diesel fuel and fuel oils. The water-holding capacity for the 300HS-10 Type2 and the 300HS-30 Type 2 is 130 milliliters or 4.5 ounces before flow restriction occurs. The 300 HYDROSORB Spin-on Filters are recognized by Underwriters Laboratories for use on service station pumps and dispensers. The 300 HYDROSORB Spin-on Filters are available with a selection of aluminum and cast-iron filter adaptors for standard applications.

Features & Highlights

  • Pack of 12 filters
  • The 300-HS10II Hydrosorb is recommended for gasoline and diesel fuels
  • Has a maximum flow of 25 gpm/94.6 lpm and maximum working pressure of 50 psi/3.4 bar
  • 300 Hydrosorb Spin-on Filters are recognized by Underwriters Laboratories
  • Made in USA

Additional Information

Brand:
Cim-Tek
Manufacturer:
Cim-Tek
Category:
Fuel System Tools
MPN:
70059-12
UPC:
687965015661
Part Number:
70059-12
Size:
12
Publisher:
Cim-Tek
Item Weight:
15 pounds
Package Weight:
14 pounds
Package Size:
12 x 8 x 12 inches

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Cim-Tek, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


maXpeedingrods 10AN 20FT Stainless Steel PTFE/Teflon Fuel Line AN10 Fitting Swivel Hose Kit AN10 20Feet - Black
By maXpeedingrods
mpn: MJ99,
Package includes: AN-10 Straight Swivel Hose End x 4 PCS AN-10 45° Reusable Swivel Hose End x 2 PCS AN-10 90° Reusable Swivel Hose End x 2 PCS AN-10 180° Reusable Swivel Hose End X 2 PCS AN-10 Silver Stainless Steel / Nylon Braided Hose x 20Feet/6M (You will get exactly the same as picture shows) Braided Hose Features: Inner hose Material: CPE Synthetic material hose Outside Material: Nylon and Stainless Steel Wires Working Temperature: -73°C to + 260°C Working Pressure: 1000 PSI Burst

Cim-Tek 70063-6 800HS-10 Spin-On Filter 6-Pack
By Cim-Tek
mpn: 70063-6, ean: 0687965015685,
The Cim-Tek 70063 dispenser filter removes particulates like dirt, dust and rust. For use with diesel, gasoline, or ULSD fuels. This is a high Volume Spin-on Filter. The Hydrosorb 10 Micron has a 1-1/2''-16 UNF. It also has a 1'' Flow. Model number 800HS-10Pack of 6 filters. This is a High Volume Spin-on Filter with 10 Micron. Designed with 1-1/2''-16 UNF. Has a 1'' Flow. Model number 800HS-10.

DCP Products 2001-2004 LB7 Duramax Injector Sleeve Removal Tool and Install Tool
By DCP Products
mpn: ORI932-405, ean: 0754220409708,
Item listed is a tool kit to remove and install 6.6L Duramax injector sleeves.6.6L Injector Sleeve Removal Tool.

CTA Tools 8877 Fuel Injector Puller
By CTA Tools
mpn: 8877, ean: 0053001088775,
CTA Tools 8877 Fuel Injector Puller - VW is expertly engineered and crafted to the exacting standards expected from CTA Tools. It is designed to install and remove high-pressure injectors and installs the combustion chamber seals found in late model VW and Audi applications with direct injection FSI systems. The part comes packed in a blow mold case. Whether tuning up your '68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - dailynewsdetroit.com. All Rights Reserved.