Extreame Savings Item! Free Shipping Included! Save 49% on the GEARWRENCH 3795D Brake Bleeder Tank by GearWrench at Daily News Detroit. MPN: 3795D. Hurry! Limited time offer. Offer valid only while supplies last. Diaphragm-type bleeder for conventional and ant-lock brake systems allows for one-man operation. Keeps brake fluid and air separated. Steel construction.12-Feet Long Hose for Access. Automatic Fluid Shut-off. 4-Gallon Capacity Tank.
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by GearWrench, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By Motive Products
mpn: 0117, ean: 0831219011170,
Note: if your Motive Products Power Bleeder does not have a set of brass fittings on the hose midway between the tank and the cap you will also need to order p/n 0400.Note: this cap can be difficult to connect to the reservoir, it is designed for a tight seal, attaching the cap is a three step process1) Align tabs with cutouts on reservoir2) Push cap down until it seats. You may need to rock it to have it seat.3) Twist to seal.The cap will not connect to your reservoir if you push and twist at
mpn: THE803X, ean: 0008721803993,
Professional kit includes long-lasting aluminum adapters for US and metric fittings. US adapters: Two 3/8-24, two 7/16-24, two 9/16-18, two 9/16-20, and two 1/2-20. Metric adapters: four M10 x 1.0, four M10 x 1.25, two M11 x 1.5, two M12 x 1.0, two M12 x 1.5 and two M13 x 1.5.Check values included. Hose aluminum thread gauges included. Detailed instructions and durable case. Includes 14 millimeter adapters for Honda/Toyota.
mpn: SCXY8018W, ean: 0735551063722,
Description: With this pneumatic brake bleeder tool, you can save the costs from workshop, for the simple operation of this tool can be carried out even in one-man operation: Connect the air tube, negative pressure generated in the reservoir, thereby the waste fluid is sucked out, and meanwhile refill the new fluid. The intake air pressure in air pump should be held between 75-120PSI. And for its' simple operation, you don't have tread the brake pedal over and again.Specification: Condition: