GSC P-D 4G63T Evo 1-9 / 90-98 DSM Black Nitride Intake Valve - 34mm Head (STD) - SET 8 by GSC Motorsports at Daily News Detroit. MPN: 2002-8. Hurry! Limited time offer. Offer valid only while supplies last. When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D
Product Description & Reviews
When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D design and simulation programs we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific applications to make sure we have the highest flowing valve head available on the market today. With the materials used we have less valve distortion at the face than any of the tested designs. Less distortion allows or better sealing under extreme conditions and more consistent performance threw the life of the valve. GSC Power-Division's new valves are sure to become the industries standard for sport compact performance valves.
* Swirl polished heads for smoother air flow over the valve
* Back cut to reduce valve weight for higher rpm, higher boost pressure and allow for more aggressive cam profiles without increasing valve spring seat pressures.
* Valve stems are micropolished to allow for less oil retention on the stem which creates less drag on the stem to guide for a smoother motion.
* Fully nitrated ( this includes the 45 which increases valve life and makes a better seal at the valve seat for improved cylinder pressure) also reduces carbon buildup on the backside of the valve.
* Intake valves are a modified 21-4n stainless and Exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity.
* Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear
* Valve tip lengths. We have taken extra time to adjust tip heights on the applications to require less tipping of the valve to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lash.
Features & Highlights
- Black Nitride Intake Valve
- 34mm Head (STD) - SET 8
Valve Train Tools
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by GSC Motorsports, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By DPL TOOLS
mpn: HT2001, ean: 0716294388341,
Specially designed to remove and install the pressure spring on intermediate lever. Applicable: for BMW MINI N12, N16,N18;for Peugeot 207,308,EP6 Engine. for BM number:119571/119572 Specially designed to remove and install the pressure spring on inte...
mpn: UT16062702, ean: 0709046474034,
This kit is suitable for assembly and disassembly of valve springs and replacement of valve stem seals on cars, without removing the cylinder head . Valves are closed by pressurized air, and can not fall down into the combustion chamber. Works great ...
mpn: 00-5747-0, ean: 0707924386110,
This tool has been designed to allow removal and installation of valve springs while the engine is both fully assembled and still in the car. Heavy duty construction will handle both stock springs as well as performance springs..In-Car Valve Spring R...
Petroleum based silicon-carbide lapping compound facilitates precise mating between valves and seats. Use with powered or manual valve lapping tools.180 grit. Silicon-carbide, petroleum based compound. 1 pound container. ...