KTI (KTI-70081) Brake Line Flaring Tool
Free Shipping Included! KTI (KTI-70081) Brake Line Flaring Tool by K-Tool International at Daily News Detroit. MPN: KTI-70081. Hurry! Limited time offer. Offer valid only while supplies last. KTI70081 Features: -Brake pipe flaring tool. -Easily form 45-degree double, single and bubble flares in OE steel, Stainless Steel, and soft metal tubing. -All the brake-flaring forming dies are mounted right on the turret. -T-handle screw clamp securely holds line in place during forming. Generic Dimensions: -Use with 0.19'', 0.25'', 0.31'' and 0.38'' diameter lines. -4'' H x 11'' W x 14'' D. Dimensions: Overall Height - Top to Bottom: -4 Inches. Overall Width - Side to Side: -11 Inches.
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by K-Tool International, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 1838947, ean: 7241870550971,
The hilmor Quick-Engage Flare and Swage Kit makes flaring and swaging easy. Pushing down the yoke engages the tube with just a few rotations to create precise flares. An innovative spring-loaded block holds the tube firmly in place while a tube-stop arrow easily identifies the correct height and position of the tube. Ball detents ensure proper and precise alignment of the flaring cone for perfect placement. This kit includes the quick-engage tool, 3/16'', 1/4'', 5/16'', 3/8'', 1/2'', 5/8'', and
mpn: 3056, ean: 0811498033056,
Get your ride running and back on the road with the ABN Brake Line Double Flaring Tool. To prepare tubing for correct flare forming, cut tubing off square with tubing cutter, deburr tubing with reamer or reamer blade of tubing cutter, chamfer the outer edge of the tubing with file or grinding wheel. For double flaring, slip prepared tubing through correct size hole in flaring bar, tighten the wing nuts firmly with tubing extending the correct distance through the flaring bar, place yoke
mpn: 4504, ean: 7258007050877,
The OTC Stinger ISO bubble flaring tool kit is designed for crack-free bubble flares on soft steel tubing used in automotive brake systems. The forged yoke is made of heat-treated steel for long life and durability and includes the flaring bar and all the adapters needed for ISO bubble flaring. Comes housed in a blow molded storage case.Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems. Flaring bar and all the adapters needed for ISO bubble flaring.
By Speedway Motors
This is the best flaring tool for the money we have found. It has a feed screw with a hardened flaring cone eccentrically mounted in needle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling. It will put a 37 degree flare in 3/16'', 1/4'', 5/16'', 3/8'', ½'', 5/8'' and 3/4'' tubing. We recommend this tool when flaring 3/16'' stainless steel brake line. Provides smooth, uniform flares with minimum effortFeed screw handle