Performance Tool W8633 5/16''-24 NF Tap and Bit Set (9/32'') by Performance Tool at Daily News Detroit. MPN: W8633. Hurry! Limited time offer. Offer valid only while supplies last. Matching Bit And Tap Provide Proper Hole Size For Easier Tapping And Stronger Threads. 5/16''-24 NF tap and 9/32'' bit set. Easy installation.5/16''-24 Nf tap & 9/32'' bit set. 5/16''-24 NF tap and 9/32'' bit set. Easy installation.
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Performance Tool, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: 7910, ean: 0731413016394,
OTC GM Hydraulic Clutch Line Disconnect Tool is a versatile tool for disconnecting clutch lines when you're working on clutch assemblies or slave and master cylinders. The bent end, intended for NVG3500 and NV4500 manual transmissions, works on 1996 to 2004 full-size 2WD and 4WD trucks, Chevrolet S-10 Blazer, and pickups. The straight end is for 1993 to 1994 Chevrolet Lumina sedan, 1995 to 2000 Chevrolet Monte Carlo, 1993 to 1999 Buick Regal, 1998 to 2002 Olds Intrigue, 1993 to 1997 Olds
Applications:8 16 and 24 valve enginesPackage Content 1PC Cylinder Head Valve Spring Compressor Removal Installer tool set【Applications】 - The Tool Set Fit for 8 16 and 24 valve engines. 【Package Including】 - 1x Valve Spring Compressor Service Set, 1x Blow Mold Case. 【Function】 - Designed to use with Valve Spring Remover Installer still on the engine and in the car, or with Valve Spring Remover Installer removed, Tool bolts to the head while the lever pivots from the base to
mpn: 10202A, ean: 0731413421280,
NOTE: 10202-1 is used on the Right Bank (closest to firewall) and 10202-2 is used on the Left Bank. You also need 10200A Timing Chain Holder Set for all 3.6L. 2012 and newer models also require 10369A. 2011 models may also require 10369A, depending on the size of bolt #4 in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A. If it is 10MM you shouldn't need it. If you don't understand what we're describing, give