Poly-Flex? Flexible Polyester Glazing Putty - 30 oz-2pack by Fibreglass Evercoat at Daily News Detroit. MPN: FIB411-2pack. Hurry! Limited time offer. Offer valid only while supplies last. .
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Fibreglass Evercoat, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By Fibreglass Evercoat
mpn: 209201, ean: 0782386184870,
Features and Benefits: First pourable finishing putty in the market Like Metal Glaze®, Glaze Coat is vacuumed processed for reduced pinholes and offers the same features, benefits and performance as Metal Glaze®, in a buff colored formula White cream hardener included This product meets the large package requirement per UPS/FedEx. The estimated shipping cost will include this fee.Fibreglass Evercoat. Glaze Coat Putty 30oz. 148178.
Pyro-Putty 2400 is a ceramic and stainless steel filled, high temperature, thermally conductive paste used to bond, seal and repair defects up to 3/8'' in cross-section in cast iron, steel and stainless steel components and structures used in automotive, truck, marine, and industrial applications to 2000°F (1093°C). Pyro-Putty 2400 is a single part, thermally shock resistant paste that will not decompose at high temperatures. It is a water-based material that contains no volatile organic
Pyro-Putty 1500 is a ceramic-filled, one-part, thixotropic paste. Used primarily to seal boiler doors and molten metal systems to 2300°F (1260°C).Dries at room temperature and cures in service at the operating temperature of the equipment. Easy to apply and removable.Resurfaces and Repairs Defects. Reduces Scrap. Machinable. Gets Stronger with Heat. Easy and Safe to Use.
Pyro-Putty 1000 is a ceramic and aluminum-filled, two-part, water-based paste used to bond, seal and repair defects up to 1/2'' in cross-section in cast aluminum parts to 1400°F (760°C).A heat cure is recommended for cross-sections greater than 1/8 thick Air dry at room temperature for a minimum of 2-4 hours, then heat cure at 160°F (71°C) for 1-2 hours.On the picture Pyro-Putty 1000 bonds heater.Resurfaces and Repairs Defects. Reduces Scrap. Machinable. Gets Stronger with Heat. Easy and